1967 Pro Street Nova

1967 Pro Street Nova

This is a brand new very high high pro street build that we have done from scratch. The car is 95% finished but due to unforeseen circumstances, our customer has decided to list it for sale. It is very difficult to describe completely what has gone into this build. Our customer wanted something that he could drive on the street but would also be an extreme show quality build with a ton of power on pump gas. This is a tube chassis car with a 100% steel body. 632” Blown Pump Gas BBC built by Beck Racing Engines. Made 1095hp and 1050lbs-ft of torque on 91 octane pump gas w a hydraulic roller cam. Dart Block w Dart Show Polished Heads The Blower Shop Billet 10-71 Supercharger Big Stuff 3 Electronic Fuel Injection Nitrous Oxide Stainless Plate kit (Not Hooked Up) w purge MSD Ignition Lemons Headers Rossler TH400 transmission w 10” converter Fabricated Sheetmetal Ford 9” rearend ceramic coated and polished Strange Alumimun center w 3.50 gear and 40 spline axles 4 wheel wilwood disc brakes Moly 4 link/wishbone suspension ceramic coated and polished Strange Coilovers M/T 33×18.5 ET Street Tires Rectangular tube frame up to the firewall Smith Racecraft round tube moly front end Fully welded and smoothed firewall, custom inner fenders, and factory core support w incredible paint and detail. Aeromotive 20 gallon aluminum fuel cell w Aeromotive in tank EFI pump and fuel system Dual Optima Batteries Full halon safety system installed. Custom mounted functioning rear factory decklid. Factory steel cowl hood that is a work of art cut, welded, and molded for the supercharger. Smoothed factory dash w autometer gauges and nitrous command center. Dual polished 10” nitrous bottles mounted in between the wheel tubs. Full cage w swing outs on both sides. Paint and Bodywork performed by Jack Crowe. Absolutely incredible lazer straight black paint that is miles deep. Far too much to list it just goes on and on. One of the finest examples of a radical 67 pro street nova that you will find. Again at this point the car is 95% finished. The seats have been recovered and mounted in the car. I have a new black factory headliner and bows that needs installed along w carpet and door panels. We have a custom made 3.5” full exhaust system mocked up w Borla XR1 mufflers. Exhaust needs welded and sent out for ceramic coat and polish. There are zero miles on the car. The engine was run on the dyno and started after install (have video). Over $250k and countless hours hours invested. Looking to get half of that back out of the car

Seller Info: Canton, OH
Jason Pratt https://www.facebook.com/jason.pratt.12532

Related Articles

Back to top button
error: Content is protected !!